Veneer MDF Board Son Tung

Veneer veneer is natural wood after exploitation-> cut (peeled centrifuged) into thick slices from 0.3mm> 0.6mm. Width depending on the average wood type of about 300mm, about 240mm long, called veneer is dried and dried.

Son Tung distributes the cheapest MDF covered with Veneer in the North

MDF Veneer is used to use a layer of MDF, plywood, or okal thickness of 3mm, glue on the substrate surface. Connect each veneer sheet according to the specifications (standard specification 1200 x 2400mm) with glue-> glue the veneer sheet onto the substrate (MDF, lumber, Plywood) covered with glue. Press the sheet again by machine (cold pressing or hot pressing) until it is sticky and flat. Using a sanding machine to create beautiful veneer surface

SON TUNG SERVICE TRADING PRODUCTION CO., LTD

Mobile: 0903458981 - 0925522999

Wooden warehouse: No. 155 - Street K2 - Cau Dien - Hanoi

Factory of Rural Production: No. 222, Extended K2 Street - Phu Do - Hanoi

Email: gosontung@gmail.com / noithatgosontung@gmail.com

Website: http://noithatsontung.com/ - http://www.gosontung.com/